Makita 10.8V CXT Battery Adapters

They are the same class of battery, measured at two different moments. Five lithium cells in series read about 20V fresh off the charger with nothing drawing from them, and settle to about 18V once a tool is running. A brand that prints 20V is quoting the first figure and one that prints 18V is quoting the second. That is why an adapter between an "18V" platform and a "20V" platform works: there is no conversion to do.

Only Makita 10.8V CXT batteries. Makita also sells Makita 18V Ni-Cd/Ni-MH, Makita 36V, Makita 18V LXT, and those use a different socket — same brand, different rail and terminals, so they need their own adapter. Compare the sliding rail on your battery against the photos before ordering.

Use the selector at the top: pick the platform on the other side of the pair and it takes you straight to the one adapter that joins them. Every combination in that list is one we actually make, so if it is there, it exists.

Not with an adapter from us. Makita 10.8V CXT works as the tool side only here — we make adapters that let other brands’ batteries run Makita 10.8V CXT tools, not the reverse.

No. The adapter carries current from the battery to the tool and does nothing else — there is no charging circuit inside it. Keep charging Makita 10.8V CXT batteries on their usual Makita charger.

Used with undamaged, compatible equipment it is not expected to. Makita 10.8V CXT batteries are lithium-ion with their own protection circuit built into the battery, and it keeps doing its job through the adapter. Stop when the tool noticeably slows rather than running the battery flat, and stop using the adapter if it becomes unusually hot or the contacts look damaged.

Usually. What matters is the socket, not the badge: if the battery slides onto a Makita 10.8V CXT tool and locks the way an original does, the adapter will take it. Aftermarket batteries do vary in moulding, so if yours looks unusual send us a photo and we will check before you order.